EGV series automatic gas shut-off valve is a safety valve installed on gas lines outside the residence.
When assembled on the production lines, the device is activated by manually pulling the reset lever upward, which opens the orifice surface inside the device for gas flow. As a result, the valve assumes its normally open position, allowing gas from the line to pass to the user side. During normal operation, the product functions in this open position without any electrical consumption, allowing gas to flow through. The automatic gas shut-off valve, designed for safety purposes, activates when it receives an electrical signal from a compatible connected device. Upon receiving this signal, the internal mechanical drive system is triggered. This action causes the shaft connected to the reset lever to move toward the orifice surface, sealing the gas passage area using a suitable gasket mounted on the shaft. This seals the orifice in a leak-proof manner, cutting off the gas flow in the line and keeping the valve in a closed state.
Advantages of Automatic Gas Shut-Off Valves
Device Protection: Automatic gas shut-off valve can receive the electrical signal in question from a gas alarm device or a similar signal generating device to which it is electrically connected.
Efficient Operation: It allows machines to operate stably and efficiently by preventing contaminated gas flow, thus increasing system performance.
Energy Saving: Clean and regular gas flow prevents excessive energy consumption of machines and provides savings by increasing energy efficiency.
Environmentally Friendly: Automatic Gas Shut-Off Valves create an environmentally friendly working environment by reducing industrial air pollution and contribute to the protection of nature.
Thermal and Mechanical Durability: Valves are resistant to thermal and mechanical stresses encountered in operating conditions, thus providing long-term and safe use.
The automatic gas shut-off valve can receive the electrical signal in question from a gas alarm device or a similar signal generating device to which it is electrically connected. The most common use is in conjunction with a gas alarm device. In this use, in the event of any inappropriate gas leakage in the area where the gas alarm device is located, the automatic gas shut-off valve, which receives an electrical signal from the alarm device, automatically cuts off the gas flow in the line to which it is installed and stops the passage in the gas line until it is manually installed again for safety purposes. The EGV series automatic gas shut-off valve is a safety valve installed on gas lines outside the residence and used for safety purposes. When it receives an electrical signal, the mechanical drive system is activated, cuts off the gas flow and keeps the line in the closed position. It is usually used in conjunction with gas alarm devices and provides safety by automatically cutting off the gas when a gas leak is detected.